Your Search: "specialized"

When you need more insulation for a long, cold ride, our Therminal Liner gloves are up to the task. They're designed to give you an added level of warmth by wearing them inside either our Deflect or Element gloves. We made them plenty thin to avoid adding any bulk or affecting your finger dexterity or bar feel. And on a brisk spring or fall day, they're more than capable of staving off chills when worn alone, which is no problem at all given the durable reinforced palm. - Lightweight glove keeps you extremely warm while preventing excess weight and bulkiness under your exterior glove layer. - Fabric Content: 91% Polyester, 9% Spandex Knit.

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Power Comp saddle, with its hollow Cr-Mo rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 220g

When it comes time to hit a track wide open, you simply can't do any better than our Demo Pro Pants. - VaporRize woven fabrics are treated to be water-repellant, while remaining durable, stretchy, and lightweight for peace of mind on the mountain. - Three zippered pockets provide ample, secure room to store everything that you need while you're out riding. - Laser perforated venting adds sophisticated points of ventilation that don't detract from the durability or performance of the shorts. - Designed to retain a loose and open fit while using pads and armor. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - Tapered leg helps to prevent anything getting caught in the chain. - Deflect UV 50+ protects your skin from harmful ultraviolet rays.

Our Trail Shorts are an essential for any trail rider's wardrobe. They're lightweight, durable, and downright comfortable—everything you need for an afternoon shred. - 13.5" inseam (size 34 waist) fall low around the knee for a roomy fit that leaves plenty of room for pads. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Does not include a liner. - Fabric Content: 100% Polyester - Front fly and button closure. - One zippered pocket and one hand pocket provide convenient, secure space to store your trail essentials. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - VaporRize woven fabrics are durable, stretchy, and lightweight for peace of mind on the trail.

When we say "The Ultimate Trail Bike," we mean it'the all-new Stumpjumper is everything you could ever ask for in a trail-ripping steed. Want a bike that climbs with ease? The Stumpjumper delivers, thanks to a ground-up suspension redesign and lightest-in-class frame weight. How about something that's ready to shred when the trail turns downhill? That suspension re-design - paired with new Trail Geometry and the Rider-First Engineered frame's perfect blend of stiffness and light weight - turns the Stumpjumper into an absolute monster descending. Point it where you want to go and let the party begin. - THE TRAIL BENCHMARK - When we set out to design the all-new Stumpjumper, we pursued some hefty goals. It had to excel on any kind of trail, for every style of rider. To achieve that, we went after serious weight reduction without sacrificing durability, a stiff, responsive chassis that still rides light and lively, geometry that improves everyone's riding, and the best suspension kinematics we know how to design. Turns out, you can have your cake and eat it too with the new Stumpjumper. - THE SWEETEST 130MM OF TRAVEL YOU'LL EVER RIDE - We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast, handles like a dream everywhere, and climbs like it has a motor. - PROGRESSIVE GEOMETRY - The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It's long, low and slack, with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable, more carvealicious, more comfortable climbing, more better everywhere. With FlipChip adjustability you're able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. - RIDER-FIRST ENGINEERED - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits - rail-sharp cornering and balanced front and rear stiffness - at the lightest-possible weight, And by light, we mean real light: 2,250 grams (S-Works, S-3 size, with rear shock).

When it comes to choosing the perfect pair of bib shorts, comfort is everything. And for anyone whose rides demand premium materials, superior fit, and cutting-edge technologies, the new RBX bib shorts are sure to be your jam. We designed an open suspender fit and bib construction that's engineered to keep the shorts up and in-place without constricting the upper body. The stretchy elastic suspenders are uber plush and soft against the skin, and accommodate taller torso lengths with ease. A non-stretch, sail cloth center back panel is laser-cut for breathability and anchors the back of the shorts for added stability. Silicone-infused fabric cuffs, meanwhile, provide a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. Our new Body Geometry Contour chamois also adds unrivaled comfort by minimizing its total footprint and keeping only what's structurally necessary. This minimizes pressure on nerves and soft tissue, while also maintaining the optimal level of support. - Soft and supportive four-way stretch fabric provides ample comfort and a soft hand. - Soft mesh bib uppers with binding provide a comfortable hold. - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit. - Articulated design ensures the perfect fit while in the riding position. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays. - Single-density-foam Body Geometry Contour Chamois is pre-molded to match the shape of the body for exceptional comfort. - Slim Fit with a 10.5" inseam.

The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc

Lighter weight than our standard Thermal Warmer collection, Seamless Arm Warmers are perfect to stash in a jersey pocket when you need a little extra protection on a fast descent or for a long climb in the shadows. - Fabric Content: 58% Polypropylene, 37% Polyamide, 5% Elastane - Thermal yarns feature a brushed fleece interior that insulates, while remaining highly breathable and effective at managing moisture.

If you're like us, you have a strong distaste to sweat in your eyes while you're out riding. And to make matters worse, sunblock just adds another ingredient to the recipe for temporary blindness and discomfort. What to do? Grab a Seamless UV Beanie and make stinging eyes a thing of the past. After all, while we hate to be the bearer of bad news, your hair isn't protecting your head from harmful ultraviolet rays. And if you're attempting to curb the aforementioned by swathing your hair in sunblock like it's the hot new pomade, well, you need more than our help. Instead, our beanie provides a constant source of protection, UV 50+ to be exact, while also keeping the sweat out of your eyes. Even better, the unique NILIT BREEZE yarns react to your body heat to create a cooling sensation. So, make the smart move and maintain your diligence against the sun with our Seamless UV Beanie. - NILIT Breeze yarns react to body heat and sweat to aid in cooling and have been independently verified to lower body temperature. - Engineered construction minimizes edges and stitching, creating a smooth, compressive feel against your skin. - Fabric Content: 84% Polypropylene, 8% Polyamide, 8% Polyester

A good pair of tights should be towards the top of your winter riding essentials list, and the RBX Tights are no exception. They were purposefully constructed without a chamois, and the reason is pretty simple. For those who prefer to keep riding in their favorite bib shorts year-round, you're able to simply layer these tights over your shorts for predictable comfort and added warmth. And for anyone seeking out versatility, these tights will be perfect for use in other disciplines like Nordic skiing, running, or snowshoeing. - Articulated design ensures the perfect fit while in the riding position. - Fabric Content: 78% Nylon, 22% Spandex Knit - Four-way stretch fabric provides ample comfort and a soft hand against the skin. - No chamois included in this tight allows you to wear it over your favorite bib shorts or shorts, extending the wearability of this piece when you need the extra leg protection. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays.

When it comes to choosing the perfect cycling shorts, comfort is everything. Whether you're going fast or just cruising, it's important to know that you'll be comfy. For riders who want premium materials, superior fit, and technologies that you won't find anywhere else, the RBX Shorts are the jam. The soft four-way stretch fabric and articulated design ensure a perfect fit, but where the real comfort comes is from our Women's 3D Chamois. It features a pre-molded shape that matches the curve of your saddle, reducing wrinkles and hot spots. Top it off with a super soft top sheet to reduce friction and you're left with all-day comfort. - Four-way stretch fabric provides ample comfort and a soft hand - Silicone-infused fabric cuff provides a gentle, secure hold on the legs in order to ensure the perfect, shift-free fit - Articulated design ensures the perfect fit while in the riding position - Reflective elements increase your visibility to motorists in low-light conditions - UPF 50+ rating protects your skin from harmful ultraviolet rays - Women's-specific 3D Chamois is pre-molded to match the shape of the female body for superlative comfort - Women's-specific Slim Fit with an 8" inseam (size Medium)

Whether your goal is to escape on gravel back roads, far from cars and crowds, toe the start line at your first gravel race, or simply get the most versatile bike on the road or dirt, no bike is better than the new Diverge. It's quite simply the fastest, most capable - and just maybe the most fun - alloy bike we've ever made, delivering a ride that's quick and lively, but stable and confidence inspiring when the terrain gets rough. With all-new gravel geometry and category leading tire clearance, the new Diverge represents everything we've learned over more than 40 years of riding road, gravel and dirt. The Diverge writes an entirely new chapter in the gravel bike category, so you can dream up entirely new rides. It's the ultimate getaway vehicle. With a premium E5 alloy frame and a full carbon FACT fork the Diverge E5 delivers a fast, confident and comfortable ride on road, in the dirt, and over thick gravel. Shimano's Claris 2x8 group gives a wide range of gears for any terrain, while Axis Elite alloy wheels and Pathfinder Sport 38mm tires provide an efficient ride on pavement with the versatility for hard pack dirt riding. - Nothing unlocks a bike's capability like tire clearance, so we gave the new Diverge a whopping 47mm of tire clearance with a 700c wheel and 2.1-inch with a 650b wheel. Thanks to a drive side chain stay utilizing a machined alloy beam behind the chain rings we've created clearance without using a fragile dropped chain stay design or increasing chain stay length. - Our Premium E5 Aluminum frame provides a stiff, light, and durable platform. When mated to our full carbon FACT fork, the Diverge Base E5 becomes a light, lively and versatile bike ready to attack any surface. - We tossed gravel geometry 'status-quo' out the window. The new Diverge has the most progressive geometry we've ever created for a drop bar bike, giving riders a capable and stable bike in the dirt, that still feels responsive and nimble on the road. We've increased the frame's reach, introduced a slacker head tube and a longer offset fork. All this creates incredible confidence with a planted feeling in the dirt, while spec'ing shorter stems keeps the overall cockpit length the same and the steering lively. We've kept the bike's BB low to increase stability, but high enough to utilize with 650b wheels if that's your jam. - We've given the Diverge plenty of rack mounts, including fork and top tube mounts, to ensure you can take what you need, no matter how far you plan to go, or how long you plan to stay out.

Perfect for toddlers on the move, the Mio helmet features bold graphics, a revolutionary magnetic buckle that prevents pinching, and the Headset SC fit system for an easy, secure fit. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 1 and Older (Extended Head Coverage). - MIPS-equipped. - Headset SC fit system with toddler-oriented sizing that's designed for an easy and accurate fit. - In-molded shell improves strength and reduces weight. - Magnetic buckle improves comfort and allows parents easy and secure strap attachment that helps to prevent pinching. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Reflective webbing for increased visibility in low-light conditions. - Integrated visor/sun brim provides shelter from sunlight. - Front mesh-covered vents to keep out bugs. - Shape designed to accommodate child trailer use. - Toddler size, approximately up to age three.

In order to bring EVO fun to the masses, we took our FACT 11m carbon frame (yes, the same one as the S-Works), dressed it with a bullet-proof SRAM GX Eagle 12-speed drivetrain and a tough-as-nails set of alloy wheels, and set it loose to shred unsuspecting trails everywhere. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle—these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensure benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1 or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits—rail-sharp cornering and balanced front and rear stiffness—at the lightest possible weight. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh*t" necessities like pumps and spare tubes and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage—the same size as a small water bottle—hidden in your downtube.

When you're on the trail, you have enough to worry about without stressing on your sock situation. That's why we created our durable, no-fuss Techno Mountain Tall Socks. They feature a lightweight blend of our VaporRize yarns, which work in tandem to naturally control temperatures and manage sweat buildup. In other words, they're comfortable, and to further ensure this, we've included mid-foot arch support and a light underfoot cushion to help absorb vibration and chatter from the trail. - Techno PE VaporRize yarns are durable and highly effective at moisture management. - Lightweight underfoot cushion adds an extra buffer to trail vibration, which also combats friction and hotspots over the course of a ride. - PowerBand mid-foot arch supports the foot and secures the shape and fit where the foot needs it most. - Graded cuff height. - 7" cuff height (size Medium)

To make the Therminal Engineered Arm Warmers, we used a special cylindrical knitting machine that allows us to engineer areas of stretch, compression, and articulation while creating a seamless design. Lighter weight than our standard Therminal Warmer collection, this seamless version is perfect to stash in a jersey pocket when you need a little extra protection on a fast descent or for a long climb in the shadows. We use a yarn that offers good loft for trapping body heat and adding a good sense of durability, while a knit construction allows for excellent air permeability and breathability. This technique and design also comes with the added benefit of aligning with your elbow joint, so the warmers will stay put with just the right amount of compression at the arm and wrist cuffs. - Therminal fabrics feature a brushed fleece interior that insulates while remaining highly breathable and effective at managing moisture. - Engineered construction minimizes edges and stitching, creating a smooth, compressive feel against your skin. - Knitted articulation and openings keep the warmers in place for the perfect fit. - Deflect UV 50+ protects your skin from harmful ultraviolet rays.

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Left-hand loading on the down tube—right-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc

Our Body Geometry Dual-Gel gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure. - Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort - Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising grip - Combination of breathable mesh at the upper and soft Lycra make for a durable and comfortable top of hand - Soft and absorbent Microwipe thumb brushes away sweat with ease - Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves - Reflective elements increase your visibility to motorists in low-light conditions

Mountain Tall Socks feature a lightweight blend of VaporRize yarns, which work in tandem to naturally control temperatures and manage sweat buildup. In other words, they're comfortable, and to further ensure this, they've got mid-foot arch support and a light underfoot cushion to help absorb vibration and chatter from the trail. - VaporRize yarns are durable and highly effective at moisture management. - Lightweight underfoot cushion adds an extra buffer to trail vibration, which also combats friction and hotspots over the course of a ride. - PowerBand mid-foot arch supports the foot and secures the shape and t where the foot needs it most. - Reinforced Y-heel and toe add to the long-term durability and comfort of the socks. - Graded cuff height

For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Light, durable, and hollow Cr-Mo rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

Keeping your ears warm does a lot for overall ride comfort, and the Thermal Headband does just that. Throw it in your jersey pocket for an evening spin, or start your ride with it on a chilly day. - Velcro® closure at back allows for micro-adjustments to precisely fit the shape of your head. - Fabric Content: MAIN 85% Polyamide, 15% Elastane - OTHER: 53% Polyamide, 32% Polyester, 8% Elastane, 7% PU

The Trail-Series Wind Jacket is the perfect option for windy days with the chance of showers—it's polyester shell features best-in-class breathability, while providing light water resistance. And yeah, you can wear it to your favorite pizza joint on a breezy evening. - Minimal bulk and a built-in pocket helps it fit into any pocket, pack or bike equipped with SWAT. - Under helmet integrated hood with fixed elastic binding creates added protection with the perfect fit. - Fabric Content: 91% Nylon, 9% Spandex - Under helmet integrated hood with fixed elastic binding creates added protection with the perfect fit. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath. - Fabric Content: 91% Nylon, 9% Spandex

Your warm, dry hands will be thanking you on your next rain ride with the help of our new Prime-Series Waterproof gloves. Not only do they feature a Polartec Neoshell upper to keep your hands safe from wind and chilly weather, but they also include an interior waterproof sleeve that keeps your hands dry and fully protected from the elements. Pair that with a hydrophobic AX Suede palm and you'll have all the dexterity and comfort you need. Additionally, the HyprViz treatment increases your visibility to motorists around the clock by pairing Hyper Green with black. Like all of the pieces in our Prime-Series, the Prime-Series Thermal Gloves have been designed with the best fabrics and design available. - Fabric Content: BACK: 90% Polyester, 10% Spandex; PALM: 100% Polyester - Hydrophobic Ax Suede fit palm ensures a confident grip with the bars. - Hyper Green Polartec Neoshell is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Interior waterproof sleeve keeps your hand dry and fully protected from the elements. - Reflective details enhance your visibility in low-light conditions. - Slip-on cuff reduces bulk and provides a snug fit. - Wind-resistant Polartec Neoshell upper staves off wind and chilly weather. - Wiretap touchscreen-compatible for easy use of smartphones.

When mother nature turns on the faucet, the Race Rain Arm Covers are here to keep you warm and dry. They're fully wind and water resistant and pair perfectly with the SL Pro Rain Short Sleeve Jersey for full protection. - Fabric Content: 88% Polyester, 12% Elastane - Fully protects you from wind and water, and is a perfect pairing with our new Men's SL Pro Rain Short Sleeve Jersey.

The Seamless UV Arm Covers are your partner in crime for hot days. Featuring NILIT® Breeze yarns, these covers not only provide UV protection but actively lower your body temperature. - NILIT® Breeze yarns react to body heat and sweat to aid in cooling and have been independently verified to lower body temperature. - Engineered construction minimizes edges and stitching, creating a smooth, compressive feel against your skin. - Fabric Content: 84% Polypropylene, 8% Polyamide, 8% Polyester

Versatility is key when the mercury drops, and our Thermal Hat/Gaiter is no exception. It starts out as a wind-and water-resistant neck gaiter, but turns into a beanie when your noggin gets cold. - Warm, wind-, and water-resistant neck gaiter drawcord design at top edge allows you to adjust, secure, and pull the gaiter into a beanie. - Fabric Content: MAIN 85% Polyamide, 15% Elastane - OTHER: 53% Polyamide, 32% Polyester, 8% Elastane, 7% PU