Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Bontrager TLR Rim Strips - 29-inch/700c
$14.99 - $19.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
DT Swiss RWS MTB Rear Thru Axle
$39.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening
Stan's No Tubes Tubeless Valve Stems
$16.00 - $18.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Bontrager Bontrager Rectangular Base TLR Valve Stem
$9.99 - $14.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
Sta-Tru 26-inch Tubeless Ready DW Front
$47.99 - $92.99 $59.99 - $92.99 Up to 20% Off
- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes
DT Swiss Prolock Hexhead Alloy Nipples
$0.50 - $0.90
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
Dimension Freehub Spoke Protector
$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes
Sta-Tru 700c Double Wall Rear Wheel
$69.99 - $87.99 $69.99 - $109.99 Up to 20% Off
Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher
Specialized Stout XC SL 29 Rear
$111.99 $139.99 20% Off
The new Stout XC SL 29 rear wheel features 141mm hub spacing and a 9mm QR axle for increased wheel stiffness and improved riding performance. It includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. QR Boost 141x9mm spacing. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.
DT Swiss Competition 14/15/14g (Silver) Spoke
$1.00
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
Problem Solvers Axle Nut
$2.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Ritchey Snap-On Rim Strip
$4.99 - $9.99
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up
Enduro Max
$7.99 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
Bontrager Bontrager Rectangular Base TLR Valve Stem
$11.99 - $14.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
Sunlite Quick Release Skewer (Front, 100mm)
$11.99
- Replacement steel quick release skewers
Wheels Manufacturing Axle-11
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 130mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 141mm - 1 axle per bag
Stan's No Tubes Crest MK4
$103.99 - $129.99 $129.99 Up to 20% Off
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3'' mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Wheels Manufacturing Axle-19
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
DT Swiss RWS MTB Rear Thru Axle w/Plug-in Lever
$43.99 - $54.99 $54.99 Up to 20% Off
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever
Enduro ABEC3
$8.99 - $10.30
Grade 10 chromium steel balls
Delta Axlerodz Bolt-On Skewers
$16.99
- Extra security against theft - 5mm hex CrMo axle
Wheels Manufacturing Outer Axle Nut
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Bontrager Cross-Country Tubeless Rim Tape
$9.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
Stan's No Tubes Rim Tape
$14.99 - $24.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Dimension Freewheel Spoke Protector
$7.99
Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads
DT Swiss G 540 Disc 700c
$45.59 - $56.99 $56.99 Up to 20% Off
This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.
Stan's No Tubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Wheels Manufacturing Axle-20
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many tandem hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 187mm - 1 axle per bag
Roval Control 29 Carbon 6B XD Wheelset
$1,011.99 $1,350.00 25% Off
WHAT IT'S FOR, WHY IT'S GREAT From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents—a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. ASYMMETRY BEGETS SYMMETRY The asymmetric design of the Control rim offers some subtle but important benefits. With the spokes offset to one side of the rim, this allows us to reduce the spoke offset that usually occurs at the hub. In turn, this means we can generate greater bracing angles for the spokes between the hub and rim, while also minimizing the spoke tension differential that often occurs between drive- and non-drive side spokes. The end result is a wheel that is stronger, laterally stiffer, more durable, and in the case of the Control, allows us to utilize the same length spoke throughout the whole wheelset. MINIMUM WEIGHT, MAXIMUM DURABILITY, EASY SERVICEABILITY Striking a no-hassle balance between low weight and low maintenance, we chose DT Swiss 350 Classic hubs (15x110mm thru-axle front, 12x148mm thru-axle rear) as the basis for the Control Carbon wheels. With sealed bearings, a notoriously durable 36-tooth ratchet, and 28 spokes front and rear, dependability is assured. QUALITY THROUGHOUT, FROM HUB TO SPOKE TO NIPPLE TO RIM There is absolutely no point in laying up an awesome rim and pairing it with a quality hub, only to skimp on spokes and nipples. So, keeping strength and dependability foremost in our minds, we opted to hold the Control Carbon wheel together with the best: DT Swiss Competition Race spokes and alloy Pro Lock nipples.
Page 1 of 1