Filter By:
- Lubes/Cleaners (235)
- Tools (1176)
- Workstands (68)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$21.95
- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles
- AM5201: spanner wrench for Crossfire and universal 4-slot freewheels
- AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels
- AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$16.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$12.99
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place.
Features:
- New and Improved
- 20mm of Adjustment
- Single Axle Position
- Slotted for Dropout
- ED Black Hardware
- Anodized Finish
Specs:
- Axle Size 10mm (3/8") only
- Material 6061-T6 Aluminum
- Hardware
- Stainless Steel
$29.99
Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel.
When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox.
Features:
- New and Improved
- 45mm of Adjustment
- XO Skeleton Design
- Dual-Sided Adjustment Grid
- Dual-Color Adjustment Block
Specs:
- Axle Size: 10mm (3/8") only
- Material: 7075-T6 Aluminum
- Hardware: Stainless Steel
$14.99
- Freewheel remover for use with single speed 4-key freewheels
- Can be used with a 24mm wrench
- Compatibility: 4-Key
$28.99
- For use on 8-key single speed freewheels
- Tool Type: Freewheel Remover
- Compatibility: 16-22T smallest cog (Gray)
- Compatibility: 13-14T smallest cog (Silver)
$3.99 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components
- Dries to a thin waxy film that clings to metal for months
- Law prohibits ORM-D materials from shipping by air
$4.99
Faster flat repairs and easier tire swaps. Take some of the frustration out of flat repair with a pair of anatomically shaped, robust tire levers from Bontrager. Tire levers designed and approved to work with Bontrager wheels and tires. Safe for Tubeless tires
$14.99
A high-performance bike wash that’s designed to clean your bicycle gently and effectively to keep it looking its best.
So fresh and so clean
Superior dirt-lifting and cleaning abilities make Bontrager's Bike Wash the easiest and most effective way to clean your bike. It's formulated specifically for bicycles, so you can save your dish soap for the dishes and your shampoo for the shower.
Product details
- High-performance bike wash designed for all bikes and all paint finishes
- Proprietary formula is Trek's factory-recommended bike wash
- Also great for cleaning wheels, tires, and shoes
- Pleasing cherry scent
- Spray directly on bike, wait to allow it to soak, and clean with soft brush
- 32 fl oz (946mL) spray bottle is easy to use and refillable with diluted Bontrager Degreaser
- Keep out of reach of children and do not ingest
$51.99
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly.
The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket.
- Tight fitting, stretch neoprene material zips open for easy access
- All the items you need to fix a flat tire
- Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag
- Reusable hand insulation sleeve, vulcanizing patch kit
- Room in the bag for ID, money, keys, and more
$12.99 - $39.99
Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.
$9.45
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems.
- Does not absorb water so regular bleeding is not necessary
- Non-toxic and will not irritate skin
- Will not damage frame finishes
$41.45
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes
-Does not include mineral oil
- Fits Brand: Campagnolo
- Hydraulic Fluid Type: Mineral Oil
$47.00
- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups
- Allows use of a Torque wrench to obtain proper torque specifications
$214.00
Campagnolo UT-CN400 Chain Tool.
- Used to install 12-speed and 13-speed Campagnolo chains
$272.00
- 11 speed compatible
- Allows removal, installation and peening of rivets
$17.50 - $19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$16.99
Strong and nearly indestructible, this heavy-duty tool provides much more leverage than the weaker, more brittle tire lever. Designed to pull the tire over the rim's bead, it never protrudes into the tire thus avoiding inner tube damage that commonly occurs with tire levers. And the nylon material prevents undesired scratches from occurring to the rims attached to your beautiful wheels. This tool can be used for tires up to 46mm. Made of lightweight, durable, injection molded, fiber reinforced thermoplastic.
$15.00 - $29.00
Chris King Blue Grease is a resilient lubricant optimized for headsets and as a general assembly compound. Viscous and tacky, Blue Grease is an ideal headset bearing lubricant and assembly compound, engineered to withstand extreme riding conditions. Compatible with steel and ceramic bearings.
$16.20
Engineered for high performance at all temperatures and less rolling resistance.
- The only recommended grease for King hubs
$31.00
Service tools to ensure long-term success of Chris King hubs.
- For use in bearing preload adjustments on all Chris King front and rear hubs
$203.04
Service tools to ensure long-term success of Chris King hubs.
- For intensive servicing of Ringdrive system found in most Chris King rear hubs
- Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual
- Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs
$49.99
- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables
- Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger
$7.99
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime
$19.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m10 includes:
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 124g
Warranty: Lifetime
$25.99
The ultimate trail-side companion.
Details
- 13 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 164g
$29.99
Tubeless tire plug kit plus CO2 head.
- Tire plug tool
- Tire plugs
- CO2 head
- Storage case
- Mounting bracket
- 5 year warranty
$29.99
- Tube / gear storage with hook-and-loop strap
- Tire plug tool + 2 plugs
- Tire lever
- Third party online sales strictly prohibited by manufacture
$29.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m17 includes:
Chain tool: 8/9/10 speed compatible
Spoke wrench: #0, 1, 2, 3
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Open wrench: 8mm, 10mm
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 168g
Warranty: Lifetime
$33.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$39.99
The ultimate trail-side companion.
Details
- 20 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Chain Tool: 8/9/10/11/12 speed compatible
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Open Wrench: 8mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener
- Spoke Wrench: #0, 1, 2
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 203g
$39.99
- Reversible left/right entry bottle cage design
- Tire plug tool + 2 plugs
- Tire lever
- Third party online sales strictly prohibited by manufacture
$42.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage
$49.99
- 11 different tools housed in a composite storage case
- Plug tool and plugs
- 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches
- Torx T25
- Phillips #1 & flat screwdrivers
- Bottle opener
$59.99
- 16 different tools housed in a composite storage case
- Plug tool and plugs
- Case features an 8-12sp chain tool and doubles as a handle for extra leverage
- 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches
- Torx T25
- Phillips #1 & flat screwdrivers
- #0, 1, 2 & 3 spoke wrenches
- Bottle opener
$89.99
- Tube / gear storage with hook-and-loop strap
- 2, 2.5, 3, 4, 5, 6, 8mm hex
- T10, T25 torx tools
- Flat screwdriver
- Tire plug tool + 4 plugs
- Tire lever
- Chain tool
- Spoke wrenches 0, 1, 2
- Valve core tool
- CO2 head
- Fits a spare chain link + 16/20/25g CO2 or Crankbrothers Klic
HV pump, sold separately
- Optimized width for maximum pedaling clearance
- Third party online sales strictly prohibited by manufacture
$99.99
- Reversible left/right entry bottle cage design
- 2, 2.5, 3, 4, 5, 6, 8mm hex
- T10, T25 torx tools
- Flat screwdriver
- Tire plug tool + 4 plugs
- Tire lever
- Chain tool
- Spoke wrenches 0, 1, 2
- Valve core tool
- CO2 head
- Fits a spare chain link + 16/20/25g CO2 or Crankbrothers Klic HV pump, (sold separately)
- Optimized width for maximum pedaling clearance
- Third party online sales strictly prohibited by manufacture
$119.99
- 2, 2.5, 3, 4, 5, 6, 8mm hex
- T25 torx tool
- Flat screwdriver
- Tire plug tool + 2 plugs
- Tire lever
- Chain tool
- Spoke wrenches 0, 1, 2
- Valve core tool
- CO2 head
- Storage tube
- Fits a spare chain link + 16/20g CO2, (sold separately)
- Third party online sales strictly prohibited by manufacture
$20.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel.
- Rubberized ergonomic handle
- Unique "thumb flange" makes it easy to apply pressure to the tire bead
- Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims
- Lifetime warranty
$120.00
The Ultimate Tire Lever.
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel.
Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use
Unique “thumb flange” makes it easy to apply pressure to the tire bead
Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims
$16.00
- Professional wrenches fit internal nipples on many deep section aero rims
$17.50
- Slotted construction for securing Aerolite bladed spokes
- Helps prevent spoke twisting while wheel building/truing
- Red handle for 0.8-1.0mm spokes
- Black handle for 1.0-1.3mm spokes
$17.60
Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs
$18.30
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Multi-tool for DT aero spokes, torx, and square nipples
$27.60
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Works with Torx-style nipples found on DT Swiss Tricon Wheels
- This professional tool is designed for a precise fit and prevents rounding of nipples
- Metal nipple interface contacts torx nipple on all surfaces
$34.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- This professional tool is designed for precise fit and prevents rounding of nipples
- Metal nipple interface contacts nipple on all four surfaces
- Fits 3.25mm square nipple interface
$36.50
Tools for working with DT Swiss spokes.
- Punch with concave head
- Improves seating of the spoke head in the hub flange
$65.40
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$72.30
- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs
$75.00
EXP Star Ratchet Disassembly Tool- Ratchet EXP Hubs
Page 1 of 25
Next page