Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

$5.00
Pair of EndCaps for Yakima CoreBar.
$5.00
Pair of EndCaps for Yakima JetStream bars.
$7.00
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
$7.00
Includes a single SKS key.
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$12.00
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
$15.00
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
$20.00
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
$24.00
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty
$29.00
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
$29.00
Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.
$30.00
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required
$30.00
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty
$39.00
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.
$39.00
A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately
$49.00
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
$70.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
$72.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
$72.00
Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks. PRODUCT DETAILS - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates) PRODUCT SPECS - Weight: 0.60 lbs.
$89.00
No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.
$90.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
$129.00
From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 16 - Molded Liner fits snugly in SkyBox 16 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up
$139.00 - $245.00
Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”
$144.00
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
$144.00
Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
$144.00
Custom Landing Pads to install directly to the factory mounting points on raised rails of the 2020+ Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs: - Weight: 0.60 lbs. - Limited Lifetime Warranty
$144.00
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.
$149.00 - $159.00
Yakima Tracks offer easy connectivity, and a low profile when towers are removed. Combine Yakima Tracks with Control Towers plus a set of Landing Pads and you have a versatile, adjustable base for your rooftop rack system. - Compatible with either SkyLine Towers or Control Towers and Landing Pad 1 - CapNut hardware included to install your rooftop rack system directly to fiberglass - For custom fit info, contact your local Yakima dealer or give us a call Product Specs: - Dimensions: L 54.00/68.00 in x W 1.62 in x H 0.50 in - Limited Lifetime Warranty
$159.00
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Page 1 of 2 Next page