Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

nuun Nuun Sport
$7.99
Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
Wolf Tooth B-RAD 2-Base Mount
$19.99
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
Wolf Tooth Pack Wrench
$44.99
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
White Lightning Clean Streak
$11.99 - $16.99
- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
Wald Wald Training Wheels 10252
$39.99
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wahoo Fitness KICKR Axis Feet
$55.00 $79.99 31% Off
Whether mashing or spinning, riding in the saddle or out, KICKR’s AXIS feet let cyclists of all types customize the ride feel, enhance feedback and offer a more realistic training experience to match their unique riding style. - Active feedback - A tuned ride  - Reduce fatigue, go longer  - KICKR AXIS feet create a realistic ride feel providing up to 5 degrees of side-to-side movement.
Wahoo Fitness KICKR Bike Indoor Smart Bike
$1,500.00 $3,499.99 57% Off
Ride real with the KICKR smart bike KICKR BIKE offers unprecedented innovations such as integrated grade changes, customizable gearing, and simulated shifting to create the most powerful, personalized, and realistic indoor training experience. Using KICKR’s legendary flywheel technology, the KICKR BIKE creates unparalleled responsiveness and power accuracy of +/- 1%. Real-time grade changes will match ascents of up to 20% and descents of -15% while allowing you to maintain speed and truly replicate the sensation of riding outdoors. Its robust steel and aluminum construction will withstand the hardest rides - even if your legs don’t. The Wahoo Fitness app will guide you through an easy set-up of the five points of adjustability on the KICKR BIKE. Choose from either professional bike fit measurements, taking a photo to measure your bike, or enter body measurements so you are able to personalize the fit to mirror the exact geometry of your outdoor bike. The KICKR BIKE can also be customized with your own handlebars, pedals, and saddle. The virtual shifting technology of the KICKR BIKE is programmable so you are able to match the exact gear ratios, including the number of speeds and cassette tooth count, and group set from the leading manufacturers - SRAM, Shimano, and Campagnolo. A digital display clearly communicates both gearing and grade so you always know where you are during every stage of the ride. KICKR BIKE seamlessly integrates with other Wahoo products and easily pairs to your ELEMNT GPS bike computer, smartphone, tablet, or PC. As with all Wahoo smart trainers, KICKR BIKE is compatible with the most popular training apps, such as The Sufferfest, Zwift, TrainerRoad and more. KICKR BIKE is not only a smart bike - it’s a training machine that blurs the line between virtual and reality. KICKR BIKE combines Wahoo's numerous indoor training innovations including the KICKR's legendary resistance and grade simulation technologies. We've created a complete training machine offering a ride experience that blurs the line between virtual and reality. - KICKR BIKE combines KICKR’s legendary resistance and grade simulation technologies to replicate the sensation of riding outdoors—including downhill simulation that allows you to maintain speed on virtual descents. - Virtual shifting and custom gears allow you to match the gear ratios of your outdoor bike. Reality Shift replicates most major group sets to create the most personalized ride experience. - Guided by an intuitive set-up app, Wahoo has made it simple to match KICKR BIKE’s fit to your outdoor bike’s exact geometry. From saddle height to crank length to reach, you can dial in the fit that provides optimal comfort and performance. - Setup and calibration-free; easy to reconfigure for different cyclists. KICKR BIKE offers the ultimate in convenience for those who want to go from zero to ride as quickly as possible. - KICKR BIKE offers the widest range of compatibility and connectivity and works with most popular training apps. Say goodbye to broken and failed connections and hello to a smooth indoor riding experience. GEOMETRY & SIZE - Footprint (Length x Width): 48 in x 30 in (121 cm x 76 cm) - Standover Height Range: 37 in to 47 in (95 cm to 119 cm) - Maximum User Height: 6 ft 4 in (192 cm) - Minimum User Height: 5 ft (152 cm) - Crank Lengths: 165mm, 167.5mm, 170mm, 172.5mm, 175mm TECHNOLOGY & DATA - Wireless Technology: ANT+, BLUETOOTH Low Energy, and ANT+ FE-C - Device Control: iOS, Android, and PC (Mac and Windows) - Resistance Type: Electromagnetic and Enhanced Motor - Accuracy: + / - 1% - Wireless Firmware Updates: Yes - 3rd Party Power Meter Compatibility: No - Metrics: Speed, Distance, Power, Cadence, Grade SPECIFICATIONS - Maximum Power Wattage: 2200 W - Maximum Incline: 20% - Minimum Decline: -15% - Flywheel Weight: 13 lbs plus enhanced motor - Total Weight: 93 lbs // 42 kilograms - Electrical Connection: 100-240v power cord -ADDITIONAL FEATURES - LED Indicator Lights: BLUETOOTH Low Energy and ANT+ - KICKR HEADWIND Compatible: Yes - ELEMNT GPS Bike Computer Compatible: Yes - Construction: Steel and Aluminum - Controlled Resistance: Yes
URSUS Easy Center Mount Kickstand
$11.55
Ursus Easy Rear Mount Adjustable center-mount kickstand has the capacity to hold up to 55 lbs. Tool-free adjustment allows you to set the perfect length for any bike with 26"-28" wheels.
Troy Lee Designs Swelter Glove
$45.00
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way onto the hands of great athletes around the world. The Swelter glove is designed to extend your riding into cooler weather. The 3-layer softshell fabric as a fleece liner for added insulation. Keeping the warmth in is a longer compression-molded cuff. - Swelter Glove Features: - Dual-layer palm with mapped laser-ahole perforation - TPR index finger for protection - Silicone printing on fingers for improved lever grip - Compression-molded cuff
Troy Lee Designs Speed Knee Sleeve
$54.00
Not every day on the trail requires World Cup level protection. On those days, the Troy Lee Designs Speed Knee Sleeve's 4mm D3O® material offers impact protection and the 360-degree seamless construction keeps the pads comfortably in place. SPECIFICATIONS - D3O® 4mm ultra-lightweight and flexible knee pad - Silicone grippers prevent slipping - 360° seamless construction for all-day riding comfort - Reflective logos - Sold in pairs-left/right - CE EN 13688:2013 certified
Troy Lee Designs Skyline SS Jersey
$54.99
Our best-selling Jersey that is easy to wear and with supreme comfort. Skyline jersey is a relaxed-fit technical jersey made of newly developed poly-spandex blend with a new fit combined with colors and graphics that are easier to wear for riders of all types.
Troy Lee Designs Drift Short Shell
$59.99 - $109.00 $109.00 - $109.99 Up to 45% Off
Super light poly-stretch fabric and welded seams create optimal comfort that pair up with our pro liners (sold separately) or a bib short like a champ. DRIFT shorts have perfect pocket placement behind your leg so you won’t even notice your phone and a slim rear waistband pocket to sneak in a snack. SPECIFICATIONS - Ride Fit - Lower Leg & Center Back Waistband Zippered Pockets - Blue Sign Certified 4-Way Stretch Woven - Critical Welding Construction - Quick Dry Finish
Troy Lee Designs Women's Lilium SS Jersey Block
$60.00
Utilizing quick-dry 4-way stretch knit, the Troy Lee Designs Lilium Women’s Jersey is at home on all trails. - Women's Precision Fit - Blue Sign Certified 4-Way Stretch Knit - UPF 20+ (solid areas) - Wicking and Quick Dry Finishes - Drop Tail Hem
Troy Lee Designs A1 Helmet w/ MIPS Classic
$72.50 $145.00 50% Off
Fit, Protection, Style After years of research and development, the Troy Lee Designs Team is proud to introduce our latest creation - the A1 helmet. Here at TLD, styling, graphics, fit, function, and safety are key in everything we create. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps, or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection, and style you want. - Reinforced polycarbonate shell in-molded with EPS liner extends down the sides and back of the head for maximum protection and durability - MIPS brain protection system reduces rotational forces to the brain - 8 pressurized intake passages draw in cool air for maximum ventilation - 8 rear vacuum vortex outlets help exhaust helmet and draw heat from head - Triple position adjustable retention system allows customized fit for various eyewear, head shape, and riding styles - Single piece, ultra plush, removable, and washable comfort liner made of anti-microbial moisture wicking material for a dry, comfortable feel - Adjustable, moto-inspired visor with anodized aluminum hardware - Race-inspired styling - CPSC 1203, CE EN 107B, AS/NZS 2063 certified - 5-Star Rated by VA Tech Testing Institute Bicycle Helmet Testing lab
Troy Lee Designs A1 Helmet w/MIPS Classic
$72.50 $145.00 50% Off
Fit, Protection, Style Here at TLD, styling, graphics, fit, function and safety are key in everything we create. After years of research and development, the Troy Lee Designs Team introduced the A1 helmet in 2013. We made one of the most comfortable MTB helmets on the market even safer with the addition of MIPS rotational brain protection. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single-track, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. "The A1 Classic MIPS Helmet takes top safety honors, earning a perfect 5-star rating in Virginia Techs impact test and was the number one tested mountain bike helmet." - VA Tech Helmet Testing Lab - Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head - EPS impact liner maximizes impact protection while minimizing weight - Innovative break-away visor screws - 16 port hi-flow cooling system both pulls and pushes air for maximum ventilation - Ultra-plush quick-dry comfort liner is both removable and washable for maximum ventilation - Adjustable, cam-lock strap dividers allow customization for different head shapes and riding styles - CPSC 1203*, CE EN1078*, *Varies by regional standards
Troy Lee Designs A1 Helmet w/MIPS Classic
$72.50 $145.00 50% Off
Fit, Protection, Style Here at TLD, styling, graphics, fit, function and safety are key in everything we create. After years of research and development, the Troy Lee Designs Team introduced the A1 helmet in 2013. We made one of the most comfortable MTB helmets on the market even safer with the addition of MIPS rotational brain protection. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging singletrack, riding dirt jumps or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection and style you want. "The A1 Classic MIPS Helmet takes top safety honors, earning a perfect 5-star rating in Virginia Techs impact test and was the number one tested mountain bike helmet." - VA Tech Helmet Testing Lab - Featuring MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head - EPS impact liner maximizes impact protection while minimizing weight Innovative break-away visor screws - 16 port hi-flow cooling system both pulls and pushes air for maximum ventilation - Ultra-plush quick-dry comfort liner is both removable and washable for maximum ventilation - Adjustable, cam-lock strap dividers allow customization for different head shapes and riding styles - CPSC 1203*, CE EN1078*, *Varies by regional standards
Troy Lee Designs Youth A1 Helmet No MIPS Drone
$75.00 - $79.00
The trail beckons with the all-new A1 Drone Youth helmet from Troy Lee Designs. Ready to conquer any ride, the A1 leads the way with 16 large air vents and the innovative MIPS system to go along with its EPS liner for outstanding impact protection. With all-mountain performance and safety in a youth-specific shell size, the A1 goes where no youth mountain bike helmet has gone before. - Reinforced polycarbonate shell in-molded with the EPS liner extends down the sides and back of the head for maximum protection and durability - 8 pressurized intake passages draw in cool air for maximum ventilation - 8 rear vacuum vortex outlets help exhaust and draw heat from head - Triple position adjustable retention system allows customized fit for various eyewear, head shape and riding styles - Single piece, ultra plush, removable, and washable comfort liner made of anti-microbial moisture wicking material for a dry, comfortable feel - Adjustable, moto-inspired visor with anodized aluminum hardware - Race-inspired styling
Troy Lee Designs Flowline Short w/Liner
$79.00 - $95.00
Flowline is our latest addition to the MTB category, incorporating our best technical innovations in a comfortable, technical, yet affordable kit. Flowline trail shorts are aimed at the enthusiast mountain biker with minimalist features, but the quality, fit and feel you expect from Troy Lee Designs.
Troy Lee Designs Stage Knee Guards
$79.00 - $79.99
The Stage Knee guard offers mid-range trail protection in a packable package. D3O is used for impact protection. D3O is soft and flexible to keep the guards comfortable while riding, but on impact, the D3O material hardens to disperse the energy for protection. Slip on a pair and head out to the bike park in confidence. - D3O lightweight, low-profile elbow impact protection - Silicone grippers prevent slipping - Spacer-prene sleeve combined with breathable mesh panel for all-day riding comfort - Durable, abrasion-resistant elbow panel - Sold in pairs-left/right - CE EN1621-1 Certified
Troy Lee Designs Shuttle Jacket
$89.00
This is the jacket that doesn't require a lot of space in your bag. The Shuttle Jacket is a lightweight, packable riding jacket that is comfortable enough to keep on for the whole ride. - TLD Wind Resistant Ripstop Fabric (165gsm) - Ventilated Underarms and Back Yoke - Lower Back Zippered Pocket - Droptail Hem
Troy Lee Designs Women's Lilium Short Shell
$99.00 - $99.99
Riders looking for a short at home on all-day pedal fests will appreciate the Troy Lee Designs Lilium Women's Short. The performance-oriented cut is constructed of a 4-way stretch woven fabric and features a comfort waist-adjustment system. Functionally, the Lilium mountain bike shorts have 3 zippered pockets, strategic laser-perforated zones, and a zipper fly and snap closure. For the mid-ride pics, the Lilium has a phone-specific pocket that will hold the phone securely.
Troy Lee Designs A1 MIPS Youth Helmet
$99.99
A1 MIPS Classic Youth Helmet The trail beckons with the all-new A1 MIPS Classic Youth helmet from Troy Lee Designs. Ready to conquer any ride, the A1 leads the way with 16 large air vents and the innovative MIPS system to go along with its EPS liner for outstanding impact protection. With all-mountain performance and safety in a youth-specific shell size, the A1 goes where no youth mountain bike helmet has gone before. Specifications - Reinforced polycarbonate shell in-molded with the EPS liner extends down the sides and back of the head for maximum protection and durability - 8 pressurized intake passages draw in cool air for maximum ventilation - 8 rear vacuum vortex outlets help exhaust and draw heat from head - Triple position adjustable retention system allows customized fit for various eyewear, head shape and riding styles - Single piece, ultra plush, removable and washable comfort liner made of anti-microbial moisture wicking material for a dry, comfortable feel - Full spectrum adjustable moto-inspired visor with anodized aluminum hardware - Race-inspired styling
Troy Lee Designs Stage Helmet w/MIPS Nova
$299.00 - $299.99
TLD's Stage helmet: less weight, more fun! Since its debut, the Stage helmet has redefined mountain bike safety, style, comfort and ventilation. Stage is the lightest full-face helmet in its class, and combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. - DUAL DENSITY EPS co-molded with EPP - MIPS brain protection system - EPP lined chinbar - 690 grams (1.5 lbs) size M/L - Meets Certification for CPSC 1203, CE EN1078, ASTM F1952, ASTM F2032, and AS/NZS 2063 *Varies by regional standards
Troy Lee Designs Stage Helmet w/MIPS Stealth
$299.00 - $299.99
TLD's Stage helmet: less weight, more fun! Since its debut, the Stage helmet has redefined mountain bike safety, style, comfort and ventilation. Stage is the lightest full-face helmet in its class, and combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. - DUAL DENSITY EPS co-molded with EPP combine to safely manage high and low-speed impact energy (PATENT PENDING) - MIPS brain protection system reduces rotational forces to the brain in certain crash scenarios - EPP lined chinbar for multi impact performance - Drawstring bag with breathable mesh paneling and additional anodized hardware, liners and pads - Meets Certification for CPSC 1203, CE EN1078, ASTM F1952, ASTM F2032, and AS/NZS 2063 - 690 grams (1.5 lbs) size M/L - 3 Year Warranty **Not rated for motorized use**
Triflow Superior Bike Lube Aerosol
$15.05 - $33.99
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
Trek Voda
$8.99 - $9.99
The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPAs and Phthalates. Plus, it has a Pop Top cap that's easy to open and secure when closed for consistently leak-free transport. - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA
Trek Voda 15
$8.99
The Voda 15 Water Bottle is clean, consistent, at-the-ready hydration for any ride. The compact size provides 15 ounces of thirst-quenching hydration that's designed to easily fit on smaller bike frames. It's made from recyclable, FDA-approved materials free from BPAs and Phthalates. Plus, it has a Pop Top cap that's easy to open and offers secure closure for leak-free transport. - Compact 15-ounce size easily fits into smaller frames and on kids bikes - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Fun, long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA
Trek Voda Water Bottle
$8.99 - $9.99
A premium water bottle that provides secure, leak-free hydration with a great in-hand feel and lasting freshness. The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPA, BPS, and Phthalates. Plus, it has a PopTop cap that's easy to open but offers secure closure and leak-free transport. Product details - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Free of BPA, BPS, and phthalates - PopTop's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle, cap, and removable seal are dishwasher safe and 100% recyclable - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA
Trek Fuel EXe 29 Range Extender Retention Strap
$9.99
Ride Farther With Confidence This strap offers peace of mind to keep your Range Extender in place in the bottle cage. For best fit, pair with the Bontrager Side Load cage Product details - Designed for Fuel EXe 29 2023 - For best results, pair with Bontrager Side Load cages (stock on the Fuel EXe) - No additional hardware needed - Refer to Service Manual for assembly instructions and service - Range Extender battery and charge cable are required and sold separately
Trek Voda Ice
$19.99 - $24.99
The only thing better than fresh water on a long, hot ride is cold fresh water-that stays cold. Voda Ice is an insulated water bottle that keeps your water cold for longer and comes in a game-changing 28-ounce size that lets you carry more of it. The premium Flow Top cap and No-Drop Grip Ring give this bottle a great in-hand feel with easy-squeeze hydration. - A premium insulated bottle that keeps water cold, feels great in-hand, and provides leak-free closure - Form fit insulation layer keeps water cold twice as long as traditional bottle - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates
Trek Trek Solstice Cycling Short
$37.99 - $59.99 $59.99 Up to 37% Off
An eco-conscious cycling short with predictable performance designed to add comfort among new riders and enthusiasts alike. Keep your undercarriage happy The Solstice Cycling Short is proof you don't have to spend a lot to gain a ton in comfort. Solstice is built with midweight, breathable fabrics that balance compression and comfort and an extra wide waistband for even pressure distribution. Plus, the dual-density Comp inForm Chamois offers sit-bone comfort and helps reduce soreness and chaffing throughout your ride. Great for rides up to 1.5 Hours / 20 Miles / 32 KM - An eco-conscious cycling short with predictable performance designed to add comfort among new riders and enthusiasts alike. - STANDARD 100 by OEKO-TEX tested - Comp inForm Chamois—Breathable, dual-density pad focused on comfort and durability to reduce soreness and chaffing - Midweight, breathable fabrics balance compression and comfort - Wide waistband keeps shorts secure with even-pressure distribution - Cuffed leg band with compressive fit keeps shorts in place while pedaling - UV protection 50+ - Fitted cut provides a streamlined body fit for enhanced performance Made with love for you and the planet The Solstice Short is made with love and is STANDARD 100 by OEKO-TEX tested. Comp inForm chamois The Comp inForm Chamois provides enthusiasts with a breathable, dual-density pad designed for comfort and durability to reduce soreness and chaffing. Wide, comfortable waistband A wide waistband keeps your shorts secure while evenly distributing pressure for extra comfort. Comfortable cuffed leg band A cuffed leg band with a compressive fit keeps the shorts right where they should be throughout your full pedal stroke. UV50+ Solstice fabrics are built to help you shine while reducing your exposure risk by offering UV50+ protection. How to care for your shorts Caring for your shorts will prolong their life, keep you fresh, and help eliminate odors to keep your ride partners happy. Wash in cold water on a gentle cycle and hang to dry.
Trek Trek Solstice Women's Cycling Short
$37.99 - $59.99 $59.99 Up to 37% Off
An eco-conscious women's cycling short with predictable performance designed to add comfort among new riders and enthusiasts alike. Keep your undercarriage happy The Solstice Women's Cycling Short is proof you don't have to spend a lot to gain a ton in comfort. Solstice is built with midweight, breathable fabrics that balance compression and comfort and an extra wide waistband for even pressure distribution. Plus, the dual-density Comp inForm Chamois offers sit-bone comfort and helps reduce soreness and chaffing throughout your ride. Great for rides up to 1.5 Hours / 20 Miles - An eco-conscious women's cycling short with predictable performance designed to add comfort among new riders and enthusiasts alike. - STANDARD 100 by OEKO-TEX tested - Comp inForm Chamois—Breathable, dual-density pad focused on comfort and durability to reduce soreness and chaffing - Midweight, breathable fabrics balance compression and comfort - Wide waistband keeps shorts secure with even-pressure distribution - Cuffed leg band with compressive fit keeps shorts in place while pedaling - UV protection 50+ - Fitted cut provides a streamlined body fit for enhanced performance Made with love for you and the planet The Solstice Short is made with love and is STANDARD 100 by OEKO-TEX tested. Comp inForm chamois The Comp inForm Chamois provides enthusiasts with a breathable, dual-density pad designed for comfort and durability to reduce soreness and chaffing. Wide, comfortable waistband A wide waistband keeps your shorts secure while evenly distributing pressure for extra comfort. Comfortable cuffed leg band A cuffed leg band with a compressive fit keeps the shorts right where they should be throughout your full pedal stroke. UV50+ Solstice fabrics are built to help you shine while reducing your exposure risk by offering UV50+ protection. How to care for your shorts Caring for your shorts will prolong their life, keep you fresh, and help eliminate odors to keep your ride partners happy. Wash in cold water on a gentle cycle and hang to dry.
Trek TQ Range Extender Cable for MTB
$49.99
Ride Farther This 85mm cord allows for clean connection to your mountain bike's charge port without extra slack that gets in the way. Product details - 85mm wire length - Charge port enables charging both bike and range extender simultaneously - LED battery level indicator - Includes Range Extender user manual - Ships to retailer. Not returnable. - Range Extender battery and retention strap are required and sold separately
Trek Trek Commuter Comp R Front Bike Light
$69.99
A bright front light with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Color-temperature balanced beam with a clean cutoff pattern for confident night riding - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds FL1 industry standards and outlasts the competition - Runtimes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - Quick Connect+ offers secure installation with a flexible mount that's compatible with all bars 22.2 to 35mm - Includes Ion Comp R light, Adjustable Quick Connect+ Mount, and micro USB charging cable
Trek Commuter Comp R Flare R City Bike Light Set
$109.99
A light set with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. Do the (b)right thing A commuter-focused light set designed to offer a better experience for you and your fellow riders. The Commuter Comp's Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. Daytime running mode on both front and rear lights adds visibility during the day to make it a great see-and-be-seen light set option for any city or path rider. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Comp R front Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare R City delivers a wide, 35-lumen beam that's ideal for city use - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Commuter Comp modes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Flare R City modes: day flash 35LM — 8hrs, night flash 35LM — 16hrs, day steady 20LM — 3hrs, night steady 2LM — 20hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included micro USB cable
Trek Commuter Pro RT Front Bike Light
$159.99
Our best light, bright enough for trail riding, and with Kindbeam to keep light on the trail and out of oncoming riders' eyes. Do the (b)right thing A do-it-all front light that's powerful enough for off-road riding. Kindbeam keeps more light on the trail ahead of you while avoiding oncoming rider's eyes, for a bright light that won't blind other trail users. A visible fuel gauge, wireless connection to tail light, and Charge-back that works as a battery bank for charging gadgets, round out an industry-leading set of features and make this our best front light option. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - 1000 Lumen high beam setting lights up full path or trail, ideal for use as MTB light - Wirelessly pair with Flare RT for single-button power-up on both front and rear light - Dual fuel gauge clearly shows available battery life and battery life of paired light - USB-C charging port supports chargeback for recharging phone or cycling computer on-the-go - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Runtimes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Includes Commuter Pro RT light, Adjustable hard mount, and USB-C charging cable
Trek Commuter Pro RT Flare RT Bike Light Set
$209.99
Our best pair of lights. Daytime running lights for visibility, and Kindbeam that lights the way while staying out of oncoming riders' eyes. Do the (b)right thing A ready-for-anything light set that pairs Daytime Running Light visibility with the bright commuter Pro RT front light. Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. It's equipped with a visible fuel gauge, wireless connection to tail light, and charge-back that allows you to use the light as a battery bank to charge gadgets. All buttoned up with a Flare RT for the top light package for any ride. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Pro RT with Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare RT provides ultimate visibility for any road, city, or path - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Commuter Pro modes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Flare RT Flash modes: 90LM — 6hrs, 45LM — 12hrs, 5LM — 15hrs, Steady modes: 25LM — 4.5hrs, 5LM — 13.5hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included USB-C and micro USB cable
Topeak VersaMount
$10.99
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)
Topeak Mounting Bracket Arm
$11.99
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
Topeak Power Lever
$13.95
An ingenious lightweight multi-function tool! Two levers connect to form power link pliers for removing or installing a chain's master link. Power Lever easily separates into two pieces for use as two tire levers. Integrated chain hook holds chain steady while removing or installing master link. - 4 Tools: PowerLink pliers, tire levers and stainless steel wire chain hook - Tool Material: Engineering grade polymer - Chain link storage compartment - Size: 11.5 x 2.3 x 1.8cm / 4.5" x 0.9" x 0.7" - Weight: 45g / 1.59oz *Not compatible with Shimano QUICK-LINK (SM-CN900-11)
Topeak Omni Quicktrack Adapter
$19.95
Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.
Topeak DeFender RX 279er
$21.99
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams
Topeak DeFender M1 (27.5/29-inch)
$25.99
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Topeak Fixer 3e Front Basket Handlebar Bracket
$26.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars
Topeak DeFender XC11 (29er)
$34.99
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
Topeak VersaCage
$37.99
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Topeak SmartGauge D2
$46.99
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Topeak Ratchet Rocket Lite DX+
$49.99
Features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots. - Includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T15, T25 Torx and #2 Phillips bits, CrMo steel chain tool, two engineering grade polymer tire levers and magnetic bit holder - Chain tool is compatible with single and multi-speed chains up to 12 speed (NOT including Campagnolo hollow pin chains)
Topeak Super Tourist DX Tubular Rack
$49.99
Topeak's Super Tourist DX Tubular Rack is a great rack for long-distance touring. It's the perfect add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too. And, it boasts a side bar to keep panniers in place.
Topeak MTX 2.0 Explorer
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
Topeak MTX Rear Basket
$54.99
Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.
Topeak MidLoader
$54.99 - $69.95
Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your fame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water resistant and durable materials, it mounts and removes quickly with hook and loop fasteners. Two water resistant zippered openings provide easy access to all your gear from either side. - Bag Attachment: Hook and loop fastener - Down Tube Diameter: Fits 38 /70 mm - Top Tube Diameter: Fits 45/66 mm - Seat Tube Diameter: Fits 28/60 mm - Material: Polyethylene / nylon Lightweight, durable, water repellent and stain resistant - Weight: 277 g / 9.77 oz (3 L); 292 g / 10.30 oz (4.5 L); 337 g / 11.89 oz (6 L) - Size: 37.5 x 12 x 6 cm / 14.8” x 4.7” x 2.4” (3 L); 46 x 12 x 6 cm / 18.1” x 4.7” x 2.4” (4.5 L); 54.5 x 13.5 x 6 cm / 21.5” x 5.3” x 2.4” (6 L)
Topeak MTX 2.0 Explorer 29er
$64.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
Topeak FlashStand MX
$69.99
Designed for bikes with hollow spindle cranksets. Lift the rear wheel to mount bike on the tune-up stand in seconds for washing, display, storage and maintenance. - CLAMP HEAD: hollow spindle drive side crank - ADD FEATURE: Quick tool-free assembly - MATERIAL: Aluminum / Engineering grade polymer / Steel - MAX WEIGHT CAPACITY: 18 kg / 39.7 lb - COMPATIBILITY: Bike with hollow spindle cranksets (more than 20 mm) - SIZE (folded): 40 x 40 x 8 cm / 15.7” x 15.7” x 3.1” - SIZE (open): 40.5 x 39.5 x 38 cm / 15.9” x 15.6” x 15” - 1.8 kg / 3.97 lb
Topeak Backloader
$74.95 - $89.99
Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button
Topeak Backloader X Pack 10L
$114.99
- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7
Topeak TrunkBag DXP (w/Velcro Straps)
$129.95
Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's Velcro straps make it a snap to attach to your rear rack (sold separately).
Topeak TetraRack R2 Rear
$134.99
- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
Topeak Tetrarack M1 Front MTB Rack
$134.99
The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb
Timber MTB Timber 3.0 Quick-Release
$24.99
The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.
Page 1 of 11 Next page