Filter By:
- Parts & Accessories (69)
- Combos/Systems (88)
- Headlights (125)
- Taillights (101)
- Show More Brands
- Show Fewer Brands
Lighting
$3.00
Updated and more secure clothing clip for mounting CatEye safety lights.
$3.00
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
$3.59
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
$3.59
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
$3.59
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
$3.59
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
$4.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$5.00
Mounting bracket for MSW front White Bat Headlight.
- Includes 1 front mounting bracket
$5.00
Replacement bracket for Pico and Tigermoth lights.
- Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$5.09
- Replacement mounting straps for Sunlite lights
- Choose specific model to fit your light
$5.95
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
$5.95
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post.
- Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot.
- UV proof rubber strap
- Compatible with every PDW tail light except Asteroid and Fenderbot
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays.
- Seat post and seat stay brackets
- Rubber shims included for a custom fit
- Compatible with all PDW tail lights except Asteroid and Fenderbot
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$6.59
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 12
$6.59
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 6
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
$6.99
- Compatible with seatpost diameter 20mm-36mm
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$6.99
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$7.99
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$7.99
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$7.99
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body
$7.99
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body
$8.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
$8.99
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$9.79
- 32 lumen single LED safety light
- 2 modes - steady and flashing
- 2 CR2032 batteries included
- Water resistant design
$9.79
- 8 lumen, single LED safety light
- 2 modes - solid and flashing
- Up to 110 hour run time with 2 CR2032 batteries (included)
- Multi-fit rubber strap attachment
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$9.95
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface.
- Compatible with Ranger, Expilion, Metro, and Streak series
- Includes adapter piece only
$9.99
Key features:
- Securely attaches all Ion lights to bars
- Reduces vibration and slippage
- Compatible with 22.2-31.8mm diameter bars
- Mount rotates left and right for optimal placement
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
$9.99
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
$9.99
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
$9.99
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
SYSTEM COMPATIBILITY
- PRO Series
Not compatible with Lumina Pro lighting systems
$9.99
If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
System Compatibility
- Lumina Series
- Mako Series
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$9.99
The bolt-on headlight bracket mounts to your fork crown and provides a unique mounting option that centers a headlight just above the front wheel. It comes with a platform that is specifically designed to work with most Planet Bike lights. This platform can be removed quickly to create a 26.2mm diameter universal mount that accommodates most clamp and stretch strap mounting systems.
- Planet Bike specific platform works with most Planet Bike headlights
- Converts to a 26.2mm universal mount to fit most headlight mounting systems
- Bracket bolts through brake mount on fork crown (60mm bolt, washer, and nut included)
- Compatible with all Blaze, Beamer, Spok, Amigo and Spot headlights
- Weight: 72 grams
$9.99
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
$10.00
CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.
$10.00
The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.
$10.49
- Versatile LED and accessories forward mount
- Bolts directly to stem faceplate
- Included Aluminum Fork Mount, spacer and screw set
- Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)
$10.95
- Installs under the seat for a low profile, less cluttered appearance
- Easy to install and stays secure in all terrain
- Clamps to most two-rail bicycle saddles
- Use with Cygolite Hypershot and Hotshot tail lights
- Can also be used with GoPro compatible interface
- Premium plastic for strong durability
- Only weighs 23 grams
- Less prone to scratching bikes compared to metal mounts
- Tail light secures to mount without removing from saddle rails
- Designed, engineered, and assembled in the USA
$10.99
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
$11.59
- 80-lumen COB chip LED headlight
- Powered by 2 AAA batteries (included)
- Can be installed horizontally or vertically
- IPX3 water-resistant rating
$11.59
- 20-lumen COB chip LED tail light
- Powered by 2 AAA batteries (included)
- Can be installed horizontally or vertically
- IPX3 water-resistant rating
$11.95
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
$11.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$11.99
- Simplistic safety light combo pack designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- Both lights feature 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries each
Page 1 of 7
Next page