Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Park Tool Bottom Bracket Tool (External Bearing)
$22.95
Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).
Park Tool Bottom Bracket Tool (Octalink / Isis)
$18.95
Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.
Park Tool Bottom Bracket Wrench (External Bearing)
$27.95
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
Park Tool CM-5.3 Cyclone Chain Scrubber
$29.99
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Park Tool CT-3.3 Chain Tool
$41.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
Park Tool Compact Crank Puller
$16.99
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park Tool Crank Puller (Square Taper)
$18.95
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Park Tool Emergency Tire Boot
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool FR-3 Freewheel Remover
$14.95
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool Fold-Up Hex Wrench Set
$11.95
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
Park Tool Folding Hex Wrench Set (1.5-6mm)
$10.99
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park Tool GSC-3 Drivetrain Cleaning Brush
$5.99
This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.
Park Tool GSC-4 Bicycle Cassette Cleaning Brush
$7.99
A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.
Park Tool Gear Clean Brush
$5.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool HCW-16.3 Chain Whip/Pedal Wrench
$32.95
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).
Park Tool Hex Wrench (8mm)
$5.99
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set
$18.99
Park's I-Beam Mini Fold-Up Screwdriver/Torx Set includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver and a T25 Torx tool (for disc-rotor bolts). The I-Beam conveniently fits in pockets and packs, too.
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool
$33.95
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.
Park Tool Mini Chain Brute Chain Tool
$20.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool PCS 10.3 Deluxe Home Mechanic Repair Stand
$279.99
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"
Park Tool PCS-9.3 Home Mechanic Repair Stand
$219.99
"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"
Park Tool Pedal Wrench
$29.99
Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.
Park Tool PolyLube 1000 4-Ounce
$7.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Professional Cable And Housing Cutter
$43.95
Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.
Park Tool Rotor Truing Fork
$19.95
If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.
Park Tool SPA-1 Pin Spanner
$11.95
Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.
Park Tool Spoke Wrench
$8.49 - $10.95
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
Park Tool Steel Core Tire Levers (Set Of 2)
$19.95
The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Newly upgraded with a tougher, more slippery material and a protruding steel tip to more easily and securely engage the tire bead. A perfect size (5"/12.7cm) to either take-along, or use as an everyday shop lever. Set of two.
Park Tool Triple Spoke Wrench
$10.95
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Osprey 1.5 Liter Hydraulics Lumbar Reservoir
$29.00
Osprey's Hydraulics LT 1.5L Lumbar Reservoir by Hydrapak is made for those who prefer an off-the-shoulder hydration solution. Designed to fit in most lumbar packs, but perfectly pairs as an extra or replacement reservoir for Osprey's Seral lumbar mountain biking pack. Twin-welded chevron baffles stabilize the water and maintain a flat profile. Thoughtful design makes filling, cleaning, and—most importantly—staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations. - Twin-welded chevron baffles stabilize the water and maintain a flat profile - Easy Slide-Seal top opening, seals watertight and provides wide access for easy filling and cleaning - Magnet clip attaches to the reservoir hose and pairs with the included sternum strap magnet for easy water access and hose management - Hydrapak Blaster bite valve offers fast, smooth water flow with a 1/4 twist on/off switch
Osprey Daylite Backpack
$60.00 - $65.00
Lightweight, simple, durable and comfortable, the Daylite is well-loved for a reason. Reach for it when running everyday errands, going for a quick hike or heading out of town. Constructed from high-quality bluesign-approved recycled fabrics, GRS-certified recycled polyester and a PFC-free DWR coating. Versatile with the ability to attach to a variety of other Osprey bags, the Daylite can handle years of everyday wear and tear. Versatile The Daylite Series accommodates a kaleidoscopic range of activities from day hikes on local trails to festivals, farmers markets and global travel. Sustainable Materials Constructed with main body bluesign-approved fabrics, GRS-certified recycled polyester and PFC-free DWR; a sustainable build that's durable and can take years of everyday wear and tear. Compatibility Compatible as an attachment to several Osprey travel and backpacking bags for additional storage and carry options, the Daylite and Daylite Plus are great bags to have around town or as a summit pack. - Large panel-loading main compartment - Attaches to a variety of compatible Osprey packs - Multifunctional interior sleeve for hydration reservoir, 13" laptop or tablet - Dual side compression straps - Dual water bottle side mesh pockets - Front pocket with organization and key clip - Internal reservoir sleeve - Harness grab handle doubles as a luggage pass-thru - Removable foam frame sheet suspension with center stiffener allows dynamic body movement - Mesh-covered die-cut foam backpanel provides comfort and ventilation - Spacer mesh harness with integrated handle. Adjustable sternum strap with whistle - Removable 20mm webbing hipbelt
Osprey Hydraulics 2.0L Reservoir
$35.00
Osprey’s Hydraulics 2L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
Osprey Hydraulics 3.0L Reservoir
$37.00
Osprey’s Hydraulics 3L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
Osprey Hydraulics Bite Valve
$6.50
Osprey’s Hydraulics Bite Valve provides a high-quality replacement for your old, neglected and beat up bite valve. The bombproof ¼ twist shut-off design guarantees you won’t experience any unpleasant leaks.
Osprey Hydraulics Bite Valve Cover
$7.00
The Bite Valve Cover keeps your reservoir bite valve free from dirt and dust on the trail.
Osprey Hydraulics LT 1.5L Reservoir
$30.00
Osprey’s Hydraulics LT 1.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning, and most importantly, staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
Osprey Hydraulics LT 2.5L Reservoir
$33.00
Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
Osprey Hydraulics Reservoir Cleaning Kit
$27.50
The taste of water from a funky reservoir is high on the list of experiences that one should combat at all costs. This cleaning kit comes complete with a reservoir cleaning brush, delivery system brush, and a drying rack to help ward off uninvited microbial visitors looking to take up residence in your reservoir.
Osprey Hydraulics Reservoir Hose
$7.00
When it’s time to replace the hose on your existing hydration system, Osprey’s Hydraulics Reservoir Hose is the answer. Made of high-quality quarter inch tubing for dependable performance and featuring a high flow rate, it will bring new life to your hydration system. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
Osprey Hydraulics Silicone Nozzle Three Pack
$11.00
Replacing old bite valve sheaths helps maintain a sanitary hydration system. Osprey’s Bite Valve Sheaths provide a soft surface for your chompers to sink into when you’re hydrating on the fly. Also perfect for those who can’t help but chew through the bite valve like their old #2 pencils in high school.
Osprey Hydraulics Three-Magnet Kit
$7.00
Hoses need to be wrangled, lest they become too uppity. Osprey's Hydraulics Three-Magnet Kit will hold things together. This pack comes with 3 detachable sternum strap magnets, and it'll make any pack Hydraulics Reservoir compatible!
Osprey Katari 7
$75.00 - $90.00
Want to hit the trail for a quick ride that calls for water and just a few minimal pieces of gear? The low-profile Katari 7 is your go-to pack. A light and airy mesh harness with rolled soft edges provide contouring comfort around your shoulders for excellent fit, while a removable webbing hipbelt enhances stability. An included 2.5-liter reservoir slips into an external hydration sleeve with a magnetic bite valve attaching to the sternum strap. A vertical front zip pocket is just roomy enough to carry the essentials, like a spare tube and tools or a rain jacket. Store food and other small items you want to access quickly in stretch-mesh side pockets. Functional and versatile, no one is stopping you from using this pack for activities in the off season. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets - Front panel vertical zip compartment with tool organization
Osprey Kitsuma 3
$44.99 $65.00 31% Off
Not every ride calls for a big pack and lots of gear. When you're looking to get in a quick ride that requires water and not much else, the women's-specific Kitsuma 3 is a quality and functional inconspicuous solution to your hydration needs. Low-profile shoulder straps give way to rolled-soft edges that offer excellent fit and stability. Stay cool and dry, even on hot and steamy days, with a lightweight AirScape airmesh backpanel that also grants full body movement. An independent hydration sleeve holds an included 2.5-liter reservoir with a bite valve that attaches to your sternum strap via magnet. Store small easy-access items, like energy bars and arm warmers, in the side mesh pockets and attach a rear bike light on the designated loop should you pedal close to sunset. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Women's-specific fit and sizing - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets
Osprey Raptor 10
$140.00 - $155.00
Let's face it, not every ride happens the way we want it to. Your bike can break, the weather can change, and the trail may not be as well-marked as you'd like it to be. The Raptor 10 is specifically designed with these challenges in mind. A premium pack that carries it all without weighing you down, the Raptor features winged shoulder straps that contour to the shape you're in when you reach for your handlebars—delivering superior stability even when the trail turns super techy. AirScape suspension evenly distributes your load while permitting dynamic range of motion, and a mesh-covered foam backpanel leaves you well ventilated. An included 2.5-liter reservoir slides into its own dedicated compartment for fill-up simplicity, and another devoted space at the base of the pack houses a Tool Roll for your mini-pump, tire lever, hex keys, and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability
Osprey Seral 4
$74.99 - $85.00
Riders looking for a low-profile lumbar pack with integrated hydration need look no further than the Seral 4. This slim waistpack features a 1.5-liter bladder with our updated high-strength magnetic coupling for improved hose management even in rough terrain. the Seral 4 has enough storage capacity for ride essentials, such as a spare tube, CO2 and multi-tool and, of course, snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5 L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Main compartment tool organization and internal zippered pocket - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
Osprey Seral 7
$89.99 - $100.00
Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
Osprey Talon 22
$150.00
Whether you're bagging peaks or bikepacking, the Talon 22 is the perfect carry solution. This lightweight pack features a breathable, close-to-body AirScape backpanel and continuous-wrap harness and hipbelt that moves with you. Trekking pole, ice axe and bike helmet attachment points make this a truly multi-sport pack. Constructed with high-quality bluesign-approved recycled high-tenacity nylon. AirScape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket AirScape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces BioStretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle BioStretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into body
Osprey Tempest 20
$130.00 - $150.00
The Tempest 20 is the perfect panel-loading, day-hiking, biking or peak-bagging carry solution with a women's-specific fit. Featuring a continuous-wrap harness and hipbelt and injection-molded AirScape backpanel that moves as you move down the trail. Attachment for trekking poles, an ice axe, a bike helmet and blinky light make this lightweight pack one of the most versatile technical pack series ever created. Made from high-quality bluesign-approved recycled high-tenacity nylon. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces Biostretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle Biostretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into body
Osprey Tempest 30
$160.00 - $180.00
A women’s-specific streamlined top-loader, the Tempest 30 was made to support big and small adventures alike. Whether you’re out for a light-and-fast overnight or a committing day trip, an injection-molded backpanel and continuous-wrap harness and hipbelt will move with you over technical terrain. This versatile lightweight pack offers features—like a reservoir sleeve and trekking pole and ice axe attachment points—that truly make it ideal for a multitude of sports. Constructed with high-quality bluesign-approved recycled high-tenacity nylon. AIRSCAPE SUSPENSION - An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. LIGHT AND FAST - A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. MULTI-SPORT - From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. SUSTAINABLE MATERIALS - Constructed with high-quality bluesign-approved recycled high-tenacity nylon CARRY INFORMATION AIRSCAPE BACKPANEL - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces BIOSTRETCH HARNESS - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle BIOSTRETCH HIPBELT - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into body FEATURES - Top load access to main compartment - Fixed top lid with external zippered slash pocket and under lid zippered mesh pocket with key clip - Large stretch mesh front panel pocket - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Dual upper and lower side compression straps - Stretch mesh side pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets
OneUp Components EDC Lite Tool
$49.99
The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. - 2, 2.5, 3, 4, 5, 6, 8mm - T25 Torx - Flat Head Screwdriver - A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube - Very easy to install without removing your star nut or threading your steerer tube
OnGuard Akita Cable (120cm x 10mm/4 feet x 0.39 inch)
$9.99
Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.
OnGuard Akita Cable (220cm x 10mm/7.13 feet x 0.39 inch)
$13.99
Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.
OnGuard Akita Cable (4.6 meter x 10mm/15 feet x 0.39 inch)
$19.99
Ever wish your cable was longer so that you could lock up multiple bikes? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.
OnGuard Bulldog Combo STD
$44.99
OnGuard's Bulldog Combo STD will guard your bike day and night. It boasts a 13mm-wide hardened-steel shackle and OnGuard's stout X2P Double Bolt design that resists drilling, picking, bumping, and pulling for serious protection. This Bulldog sports a resettable 4-digit combination plus a mounting bracket so you can bring the lock along for every ride.
OnGuard Bulldog DT
$54.99
OnGuard's Bulldog DT pairs a tough-as-nails U-lock with a sturdy steel cable for increased security. The 13mm hardened steel shackle resists cutting, and OnGuard's stout X2 double-bolt lock mechanism is pick, drill, bump, and pull-resistant. The 9" shackle, combined with 4' braided steel cable lets you lock bike to a standard parking meter post without removing your front wheel, making lock-up faster, easier, and more secure. This great U-lock also comes with five keys, including OnGuard's Microlight key which has a built-in light. - All OnGuard locks feature integrated covers for protection from moisture and dirt. - OnGuard locks feature plastic, rubber, or vinyl at all contact points to protect your bike's finish. - Shackle Dimensions: 115mm x 230mm (W x H x Dia) (4.5" x 9") x 13mm (0.51") D - Cable Dimensions: 120cm x 10mm (4' x 0.39")
OnGuard Bulldog LS
$49.99
OnGuard's Bulldog LS (Long Shackle) offers a large locking zone, plus OnGuard's high-security 13mm-thick hardened-steel construction and stout X2 double-bolt lock, which resists cutting, picking, bumping, and drilling. And with the included mounting bracket, your Bulldog can come along for every ride. This great U-lock also comes with five keys, including OnGuard's Microlight key which has a built-in light.
OnGuard Bulldog Mini
$39.99
OnGuard's Bulldog Mini is always ready for a ride. This small U-lock is as strong as larger locks, yet much more compact. The 13mm-thick hardened steel and OnGuard's stout X2 double-bolt lock resist cutting, picking, pulling, bumping, and drilling. And you can carry it on your bike with the included bracket, or easily stow it in a pack, or even your pocket. This mighty mini also comes with five keys, including OnGuard's Microlight key which has a built-in light.
OnGuard Bulldog STD
$44.99
OnGuard's Bulldog STD boasts an 13mm-thick hardened-steel shackle and OnGuard's stout X2 double-bolt lock that resists drilling, picking, bumping, and pulling for serious protection. And, thanks to the included mounting bracket you can bring the Bulldog along for every ride. This great U-lock also comes with five keys, including OnGuard's Microlight key, which has a built-in light. - All OnGuard locks feature integrated covers for protection from moisture and dirt. - OnGuard locks feature plastic, rubber, or vinyl at all contact points to protect your bike's finish. - Shackle Dimensions: 115mm x 230mm (W x H x Dia.) (4.53" x 9.06") x 13mm (0.51") D
OnGuard Bullmastiff Key Padlock, Round
$19.95
OnGuard's Bullmastiff round padlock is a great addition to your bike security measures. Compact and tough as nails, this padlock is easy to use and super strong.
OnGuard Combo Mini DT U-Lock
$49.99
Convenience and security of BullDog Combo Mini with included 4 foot fully coated, braided steel cable for more locking options. Shackle Dimensions: 90mm x 140mm x 13mm (W x H x Diam) Cable Dimensions: 120cm x 10mm